精品国产美女在线一区二区三区_午夜亚洲?v日韩?v无码大全_中文字幕制服丝袜在线观看_人妻91无码久久一二三区免费_亚洲日韩精品无码专区97_亚洲午夜av免费_国产高清在线视频伊甸园_日韩成人免费体验_欧美日韩色精品人妻在线视频_亚洲无线观看国产色多多下载

數字平膜壓力變送器 PT500-703TS
    型號:PT500-703TS
    平膜/隔膜感壓防堵結構設計,適用于熔體/流體介質;
    采用進口感壓芯片;選進的貼片工藝;
    高精度、穩定、數字標定調節、放大集成電路;
    四位顯示表頭,1位小數位;表頭采樣速率:10次/S
    4-20mA/RS485-RTU多種信號輸出;
    工業級2088鑄鋁合金防爆殼體;

    常用關鍵字:
    數字平膜壓力變送器 數顯隔膜壓力傳感器
    數字防堵壓力變送器 數顯平面膜壓力傳感器
    產品優勢:

    芯       片:
    平膜/隔膜感壓防堵結構設計,適用于熔體/流體介質;
    采用進口感壓芯片;選進的貼片工藝;
    高阻抗、高精度、高穩定性;
    膜片結構:厚膜型壓阻式、溥膜型硅芯片、法蘭型大膜片;
    100萬次使用壽命以上;

    信號處理及輸出:
    24位ADC采樣處理芯片;
    DSP數字信號調理算法;
    多點性線溫度校準;
    電壓電流過載保護;
    四位顯示壓力表頭,顯示范圍:-1999-9999,采樣速率:10次/S;
    標準工業信號輸出:4-20mA(二線制);
    數字通訊信號輸出:RS485-RTU;
    4-20mA(二線制)+RS485-RTU通訊雙輸出;
    采用先進的32bit微處理器和24bit ADC
    傳輸協議采用通用的MODBUS-RTU協議
    支持波特率:1200~57600bps,校驗位:NONE、ODD、EVEN
    支持用戶二次校準、清零、反清零、恢復出廠等操作

    結       構:
    厚膜結構:深度氬弧焊接,連接彈性材料與過程接頭,強度高,抗沖擊,耐疲勞;
    溥膜結構:激光焊接,連接彈性材料與過程接頭,硅油介質傳遞壓力,響應快,耐疲勞,小量程;
    工業級2088鑄鋁合金防爆殼體,強度可靠堅固;
    整體結構小巧,過程連接方式多樣化(M20X1.5,G1/2 ,ZG1/2,1/2NPT(螺紋小徑≥17mm)DN50等);
    過程連接材料:304或316;

    應        用:
    熔體/流體/粘稠性介質壓力測量與控制;
    工業/電力/石油/自動化等領域的設備壓力測量


    Chip:
    Flat film / diaphragm pressure sensing and anti blocking structure design, suitable for melt / fluid medium;
    Adopt imported pressure sensitive chip; select the chip technology;
    High impedance, high precision and high stability;
    Diaphragm structure: thick film piezoresistive, thin film silicon chip, flange type large diaphragm;
    More than 1 million service life;

    Signal processing and output:
    24 bit ADC sampling processing chip;
    DSP digital signal conditioning algorithm;
    Multipoint line temperature calibration;
    Voltage and current overload protection;
    Four digit pressure indicator, display range: - 1999-9999, sampling rate: 10 times / S;
    Standard industrial signal output: 4-20mA (two-wire system);
    Digital communication signal output: rs485-rtu;
    4-20mA (two-wire system) + rs485-rtu communication dual output;
    Advanced 32bit microprocessor and 24bit ADC
    The transmission protocol adopts the general MODBUS-RTU protocol
    Support baud rate: 1200 ~ 57600bps, check bit: none, odd, even
    Support the user's secondary calibration, reset, anti reset, factory restoration and other operations

    Structure:
    Thick film structure: deep argon arc welding, connecting elastic material and process joint, high strength, impact resistance, fatigue resistance;
    Thin film structure: laser welding, connecting elastic materials and process joints, silicon oil medium transfer pressure, fast response, fatigue resistance, small 

    range;
    Industrial grade 2088 cast aluminum alloy explosion-proof shell, reliable and solid strength;
    The overall structure is small and the process connection mode is diversified (m20x1.5, G1 / 2, ZG1 / 2, 1 / 2NPT (thread diameter ≥ 17mm) DN50, etc.);
    Process connection material: 304 or 316;

    Application:
    Melt / fluid / viscous medium pressure measurement and control;
    Equipment pressure measurement in industry / power / oil / automation and other fields


    應用領域:
    • 智慧消防

    • 石油化工

    • 石油管道

    • 恒壓供水系統

    規格參數
    一、技術參數
    測量介質:熔體、流體、含有雜質的液體、氣體(如:油漆、牙膏、顏料等)
    壓力形式:表壓、絕壓
    量    程:0~0.6、1、2、5、10、15、20、25、30、40、50、60、100(MPa);
    0~10、20、30、50、100、150、200、300、400、500、600(KPa);
    -100KPa~10KPa~40MPa; 
    ±10KPa~±100KPa;
    綜合精度:±0.25%FS;±0.5%FS;±1%FS
    非 線 性:≤0.25%FS
    重 復 性:≤0.1%FS
    輸出信號:4~20mA二線制; 
                   RS485-RTU;
                   4~20mA + RS485-RTU雙輸出
                   四位顯示,顯示范圍:-1999 - 9999
                   壓力表頭采樣速率:10次/S
    供電電壓:24VDC(9~30VDC) 
    壽    命:≥100萬次
    絕緣阻抗:≥1000 MΩ/100VDC
    負載阻抗:電流輸出: ≤800Ω; 
    介質溫度:-20~80℃
    環境溫度:-20~70℃
    補償溫度:0~70℃
    響應時間:≤5mS
    過載壓力:150%FS
    破壞壓力:3倍量程(量程小于40MPa);2倍量程(量程大于41MPa)
    電氣連接:防水緊線螺母直接出線,可配套防爆電氣連接
    防護等級:IP65/IP68
    連接電纜:四芯屏蔽電纜,標準長度:3米
    連接材料:304/316L
    過程連接:M20X1.5,G1/2,ZG1/2,1/2NPT,DN50……可用戶制訂規格

    二、規格型號

    三、結構尺寸

    四、電氣連接

    五、安裝方式



    Technical parameters
    Pressure form: gauge pressure, absolute pressure
    Range: 0 ~ 0.6, 1, 2, 5, 10, 15, 20, 25, 30, 40, 50, 60, 100 (MPA);
           0~10、20、30、50、100、150、200、300、400、500、600(KPa);
           -100KPa~10KPa~40MPa;
           ±10KPa~±100KPa;
    Comprehensive accuracy: ± 0.25% FS; ± 0.5% FS; ± 1% FS
    Non linear: ≤ 0.25% FS
    Repeatability: ≤ 0.1% FS
    Output signal: 4-20mA two-wire system;
                   RS485-RTU;
                   4 ~ 20mA + rs485-rtu dual output
                   Four digit display, display range: - 1999 - 9999
                   Sampling rate of pressure gauge: 10 times / S
    Power supply voltage: 24VDC (9-30vdc)
    Service life: ≥ 1 million times
    Insulation impedance: ≥ 1000m Ω / 100VDC
    Load impedance: current output: ≤ 800 Ω;
    Medium temperature: - 20-80 ℃
    Ambient temperature: - 20 ~ 70 ℃
    Compensation temperature: 0 ~ 70 ℃
    Response time: ≤ 5ms
    Overload pressure: 150% FS
    Failure pressure: 3 times of range (range less than 40MPa); 2 times of range (range greater than 41mpa)
    Electrical connection: direct outgoing line of waterproof fastening nut, supporting explosion-proof electrical connection
    Protection grade: IP65 / IP68
    Connecting cable: four core shielded cable, standard length: 3M
    Connection material: 304 / 316L
    Process connection: m20x1.5, G1 / 2, ZG1 / 2, 1 / 2NPT, DN50 Specifications can be made by users

    訂購注意事項
    PT500-703TS產品訂購注意事項
    1、產品量程選擇:
       為了使產品精度、壽命、穩定性等功能達到最佳效果,產品的量程選   擇參照以下公式計算:
       量程 = 系統最大壓力 X (1.2-1.5)倍;
       產品的實際測量壓力范圍,應該在量程范圍的15%-80%;

    2、產品供電及輸出:
       供電范圍的選擇按產品的個輸出規格確定:
       常規4-20mA,直流12-30VDC供電;
       顯示表頭,四位,小數位一位;

    3、用戶要了解產品的測量介質特性:
       介質規格、介質溫度、介質純度(是否含有雜質或顆粒等);

    4、用戶要了解產品的安裝環境及安裝方式:
       室內或室外安裝;
       環境溫度;
       要求的密封等級;
       設備的振動范圍;
       壓力密封方式:錐度密封、端面密封、弧面密封、球面密封;
       安裝空間是否滿足產品外形尺寸;

    Precautions for ordering PT500-703TS products

    1. Product range selection:
    In order to achieve the best effect of product accuracy, life, stability and other functions, the range selection of the product is calculated by referring to the following formula:
    Range = x (1.2-1.5) times of the maximum system pressure;
    The actual measuring pressure range of the product should be 15% - 80% of the range;

    2. Product power supply and output:
    The selection of power supply range is determined according to the output specifications of the product:
    Conventional 4-20mA, DC 12-30vdc power supply;
    Display header, four places, one decimal place;

    3. The user should understand the measurement medium characteristics of the product:
    Medium specification, medium temperature, medium purity (whether containing impurities or particles, etc.);

    4. Users should understand the installation environment and installation mode of the product:
    Indoor or outdoor installation;
    Ambient temperature;
    Required sealing level;
    Vibration range of equipment;
    Pressure seal: taper seal, face seal, arc seal, spherical seal;
    Whether the installation space meets the overall dimension of the product;

    使用注意事項
    產品供電范圍,24VDC(9-30VDC);
    嚴禁使用硬物(如:螺絲刀、手指、鐵釘?shù)龋┤ナ沟脡毫δて軌毫y量輸出;
    電源和信號線按訂購產品規格要求,正確接線;
    產品安裝時,受力部位為“過程連接六方扳手位”,扳手規格與六方相對應;
    嚴禁被測系統的介質溫度、壓力量程、激勵電壓超過變送器的額定使用范圍;
    注意保護變送器引出電纜,現場使用跨度過大時,建議使用金屬管保護或架空;
    壓力變送器屬精密計量儀器,切勿強加沖擊、摔打,以免損壞芯體
    產品安裝于通風、干燥、無強腐蝕環境,露天安裝加防護裝置,避免陽光直接照射;
    產品儀表嚴禁進水/漏水/泡水情況,露天安裝加防護裝置,避免陽光直接照射;

    Product power supply range, 24VDC(9-30VDC);
    It is strictly prohibited to use hard objects (such as screwdriver, finger, iron nail, etc.) to make the pressure diaphragm output under pressure measurement;
    The power and signal wires shall be correctly wired according to the specifications of the ordered products;
    During product installation, the stressed part is "process connection hexagon wrench position", and the wrench specification corresponds to hexagon;
    It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the tested system exceed the rated use range of the transmitter;
    Pay attention to protect the outgoing cable of the transmitter. When the span is too large on site, it is recommended to use metal pipe for protection or overhead;
    The pressure transmitter is a precision measuring instrument. Do not impose impact or smash to avoid damaging the core
    The product is installed in a ventilated, dry and non corrosive environment, and installed in the open with protective devices to avoid direct sunlight;
    It is strictly prohibited to enter / leak / soak water in the product instrument, and protective devices shall be installed in the open to avoid direct sunlight;
    常見問題
    我要提建議
    姓名
    聯系電話
    聯系QQ
    聯系微信
    電子郵箱
    地址
    建議內容
    佛山市普量電子有限公司

    電話:0757-26619568 傳真: 0757-26619508

    24小時在線技術支持:13790092618

    云平臺:www.puliangiot.com

    地址:佛山市順德區容桂街道華口社區華天南一路2號杰森家電智造中心3棟202號

    版權所有©佛山市普量電子有限公司